Reduces light reflection and enhances windshield transparency by removing oil films.
Removes contaminants from microscopic cracks in the glass.
Easy-to-use, pouch-type application.
Helps alleviate wiper shaking and noise.
Best used before applying KIMBLADE Windshield Treatment or installing new wipers for optimal effectiveness.
Windshield Cleaner Precautions for Use
Always wear gloves to protect your skin during application.
Apply in a well-ventilated area to ensure safety.
If the Cleaner dries on the windshield, lightly moisten the glass with water before proceeding.
For best results, incorporate the Cleaner into your regular car washing routine.
How to Use Windshield Cleaner
When using Windshield Cleaner, it's important to avoid application on hot days or on hot windshields because the cleaner can dry too quickly. If the Cleaner does dry on the windshield, simply spray a little water on the glass and thoroughly wipe it off to ensure all residues are removed and the windshield is left clean.
Initial Cleaning: Start by spraying the windshield with sufficient water to ensure it's fully wet, ideally during a car wash for convenience and effectiveness.
Preparation: Lightly shake or squeeze the Windshield Cleaner pouch to mix the Cleaner thoroughly inside. After mixing, remove the included sponge from the pouch.
Application: With the windshield still wet, apply the Cleaner using the sponge in a circular motion, exerting pressure to fully absorb the Cleaner into the glass. If the Cleaner dries on the windshield during application, re-wet the glass lightly with water.
Rinsing: Once the windshield has been wiped with the Cleaner, rinse it thoroughly with clear water to remove any Cleaner residue. If an oil film is still visible, repeat the application step and rinse again.
Drying: Dry the cleaned windshield completely. Keep in mind that the effectiveness of any subsequent treatments may be reduced if the windshield is left wet. The towel included in the package is intended for buffing the Treatment only and should not be used during the cleaning process.
Windshield Treatment Features and Precautions
Windshield Treatment Features
Extends wiper life.
Protects the surface of the windshield and increases its transparency.
Improves visibility even in adverse driving conditions.
Offers excellent water-repellent coating and windshield protection.
Comes in an easy-to-use pouch type.
When used with KIMBLADE wipers, it delivers a semi-permanent water-repellent coating effect.
Windshield Treatment Precautions for Use
Ensure the windshield is dry before application.
Apply in a well-ventilated area.
Use the treatment at temperatures above 50°F (10°C).
Wear gloves to protect your skin during application.
How to Use Windshield Treatment
Ensure the ambient temperature is above 50°F (10°C) before application. Avoid applying the Treatment during hot weather or on a hot windshield to prevent it from drying too quickly. Wait approximately 24 hours after applying the Treatment before using your windshield wipers, allowing it to fully cure and achieve maximum effectiveness.
Cleaning: Start by using the Cleaner to remove any oil film from the windshield. Ensure the windshield is completely dry before proceeding. If any water remains, allow additional drying time.
Preparation: Gently shake or squeeze the Windshield Treatment pouch to ensure the Treatment is well mixed. After mixing thoroughly, remove the enclosed nonwoven fabric.
Application: Soak the nonwoven fabric with the Treatment, then apply it to the windshield in both horizontal and vertical strokes to ensure even coverage.
Setting: Apply the Treatment generously and wait for 3 to 5 minutes, allowing it to fully penetrate the windshield.
Finishing: Once rainbow colors appear on the windshield, use the included buffing towel to rub the Treatment in circular motions, ensuring a uniform application. The treatment requires curing. For sufficient curing, please wait 24 hours after the treatment before operating the wipers.
